Lithium Forklift Trial: How Can Buyers Compare Energy per Pallet Instead of Runtime Alone?
Lithium Forklift Trial: How Can Buyers Compare Energy per Pallet Instead of Runtime Alone? — ZGFORKLIFT / MYZG. Shandong Zhuogong Machinery equipment Co.,Ltd
A lithium forklift that remains switched on for a long shift is not automatically the most energy-efficient choice. It may spend much of that time waiting, while another truck completes more pallet movements over a longer route. For a ZGFORKLIFT / MYZG purchase, a useful question is how much measured energy supports a clearly defined amount of work. This guide proposes a buyer comparison worksheet, not a certified test method or a claimed result for the B30Y. The generated illustrations use the website product photograph as their reference; they are not photographs of a customer trial.

First define one completed pallet movement. Write down the pickup point, destination, travel distance, load and lifting task. Decide how returns, empty travel, double handling and cancelled moves will be recorded. Moving one pallet across a short floor lane is not equivalent to retrieving it from a high rack and carrying it across a yard. Keep the counting rule identical for each machine. Record completed movements and elapsed working time separately so that a low energy figure cannot hide a slower operation. Select only tasks within the confirmed capacity and application limits of the actual truck.
review the B30Y/B35Y configuration
Next define where energy is measured. A battery display, charger report and supply-side electricity meter do not necessarily describe the same boundary. For a comparison of purchased electricity, use an appropriate metering arrangement at the charger supply, installed or approved by a qualified person. Record which charger and truck were connected and whether any other equipment shared the reading. Do not compare a battery discharge estimate for one truck with charger input energy for another. Battery-side data can still be useful, but label it separately and keep the same boundary across the comparison.

Starting and ending battery conditions matter. If one truck finishes with less stored energy, a short trial can make its apparent electricity use look artificially low. Agree with the supplier how the charging and working window will return the battery to comparable conditions under the approved charging procedure. Record the starting and ending indicated charge, charging sessions and any interruptions. The display percentage is contextual information, not a precise substitute for an energy meter. Do not calculate actual delivered energy merely by multiplying a percentage change by the advertised nominal battery size.
Toyota describes power studies that collect operating, idle and charging-related information to assess the suitability of an energy solution. This supports collecting application evidence rather than relying only on a runtime claim; it does not establish performance figures for ZGFORKLIFT / MYZG. For your own worksheet, retain the meter readings, timestamps, completed movement count and configuration identification together. Ask the supplier to explain what its charger or battery report actually measures. An unexplained number labelled energy is not enough to determine whether two trials can be compared.

confirm the proposed B30Y equipment
Keep route and operating conditions comparable without creating an artificial speed contest. Note the load mix, lift heights, floor condition, congestion, ambient conditions, attachments and selected operating mode. Use trained, authorized operators and the normal site rules; do not raise travel speed or disable safety functions to improve a result. If a delay occurs, classify it rather than deleting it from only one truck record. Repeat representative work periods when practical and present the variation. A single easy demonstration should not be presented as a guaranteed result for every shift or season.
request CPD15 application details
For a matched measurement window, divide the attributable measured charging energy in kWh by the number of completed pallet movements. State both the numerator and denominator beside the result, together with the trial boundary. If no movements were completed, the ratio is not meaningful. Review throughput and waiting time alongside energy per movement, not after the purchasing decision. Multiplying measured kWh by the applicable energy tariff estimates that energy charge only; it does not include all demand charges, maintenance, finance or battery replacement costs. No savings percentage is asserted here.

Before ordering, send your route description, load mix, expected shifts and available charging information to Shandong Zhuogong Machinery equipment Co.,Ltd. Use the B30Y/B35Y and CPD15 product pages to begin a configuration discussion, not to assume identical batteries, chargers or performance. Ask for the exact proposed ZGFORKLIFT / MYZG configuration and agree what a trial report should contain. Contact WhatsApp +86 131 7691 0558 or email MYZG@my-forklift.com. A documented comparison of completed work and measured electricity provides a clearer purchasing basis than an isolated promise of operating hours.
Shandong Zhuogong Machinery equipment Co.,Ltd
ZGFORKLIFT / MYZG
WhatsApp: +86 131 7691 0558
Email: MYZG@my-forklift.com
Website: https://www.my-forklift.com/
Post time:Nov.09.2026
