ZGFORKLIFT / MYZG ZG-DZ-10SD Single-Mast Aluminum Alloy Lift

The ZGFORKLIFT / MYZG ZG-DZ-10SD is a portable single-mast aluminum alloy lift for buyers who need vertical access in hotels, shopping centers, schools, museums, offices, warehouses and factory service areas. Its reference configuration provides an 11.7 m maximum working height, 9.8 m maximum platform height, 117 kg rated load and approximate 340 kg net weight. Shandong Zhuogong Machinery equipment Co.,Ltd supplies the lift as a compact electric-hydraulic solution for one-person maintenance tasks where floor care, doorway access and easy transport matter. aerial platform range.

Customer need and the portable mast solution

Many facilities still use ladders for lighting, signage, ceiling inspection and ventilation service. Repeated ladder repositioning slows the job, limits tool storage and exposes workers to avoidable climbing. Large scissor or boom platforms may be too heavy or wide for passenger lifts, finished floors and narrow corridors. The ZG-DZ-10SD answers this need with a lightweight aluminum mast, compact 0.60 × 0.60 m work platform and manually positioned base. Adjustable outriggers create the operating footprint and must be correctly installed and levelled before elevation.

Verified ZG-DZ-10SD reference specifications

complete MYZG product catalog.

Application scenarios

Hotels, malls and commercial property

Replace lamps, inspect ceiling equipment, clean high interior surfaces and service signs while minimizing disruption. Non-marking floor protection, doorway measurements, public exclusion zones and an approved power outlet should be included in the work plan.

Schools, halls, museums and places of worship

Reach gymnasium lights, auditorium fixtures, exhibition lighting and interior architectural details. The buyer should confirm finished-floor capacity, door and elevator limits, setup space for all outriggers and the ability to isolate visitors from the work zone.

Factories and workshops

Support planned inspection of overhead cables, sensors, pipes and low-complexity equipment where vertical access is sufficient. This portable mast lift is not a replacement for a self-propelled platform when the operator must frequently reposition while elevated.

Warehouse and facility service teams

Carry out spot maintenance on lighting, cameras and signs in areas that can be cleared and levelled. Keep the platform directly below the task, respect the rated load, and use a different platform when meaningful horizontal outreach is required.

Selection guide: height, access and floor limits

Start with the real work point and distinguish working height from platform height. The reference data state 11.7 m maximum working height and 9.8 m maximum platform height; a vague '10 m lift' label is not enough for comparison. Add the operator, tools and approved material and keep the total within 117 kg. Measure the route, doorway, passenger or freight elevator, floor loading, ceiling clearance and complete outrigger footprint. Confirm whether the site provides the correct AC supply or requires a battery or dual-power option.

Compare mast, scissor and boom platforms

A single-mast aluminum lift is suited to light, portable, straight-up indoor access. A double-mast aluminum lift may offer a wider platform or different load class. A self-propelled vertical mast lift is better when the operator must drive between close tasks from the platform, while a scissor lift provides a larger deck and a boom lift adds horizontal outreach. Buyers should select the machine architecture around the task rather than purchasing height alone.

Buyer's guide and quotation checklist

undefined application and buying articles.

Safe setup and daily inspection

Complete the pre-use inspection in the delivered manual. Check the aluminum mast sections, leaf chain, rollers or guides, hydraulic cylinder and hoses, platform gate and guardrails, controls, emergency lowering, wheels, base frame, all four outriggers, levelling devices, power cable and plugs. Set the machine on a firm level surface, fully deploy and secure the supports, isolate the area and check overhead hazards. Never move the base with a person elevated, climb the guardrail, add improvised height, exceed the load or use the platform as a crane.

Mast, chain and hydraulic maintenance

Keep the lift dry and clean and prevent abrasive dust from collecting in mast channels. Inspect the LH0834 leaf chain and related components for wear, corrosion, elongation and correct adjustment according to the manual; replacement decisions belong to qualified service personnel. Examine cylinder seals, hoses, fittings, wheels, fasteners and outrigger pads. Test emergency lowering and controls, protect the power cable, and record every inspection and repair by serial number. Use only parts compatible with the delivered configuration.

Distributor and rental-fleet opportunity

For distributors and rental fleets, the strongest prospects are facility contractors, hotels, retailers, schools, exhibition companies and industrial maintenance teams. Qualify each lead with task height, access route, floor type, elevator capacity, setup area, power supply and daily move frequency. Demonstrations should show transport, outrigger setup, levelling, pre-use inspection and emergency lowering. Dealer value comes from operator handover, clean well-documented rental units, rapid parts identification and planned inspection programs.

Compliance, export service and buyer confidence

Shandong Zhuogong Machinery equipment Co.,Ltd supports configuration confirmation, production communication, export packing, shipping documents, spare-parts supply and after-sales coordination under the ZGFORKLIFT / MYZG brands. CE documentation and applicable aerial-work-platform requirements depend on the exact configuration and destination and must be confirmed in writing before order. EPA engine certification is generally not applicable to this electric-hydraulic machine; buyers should verify every requested certificate against the final serialised equipment. contact the MYZG export team.

Frequently asked questions

Is 11.7 m the platform height?

No. In the verified reference data, 11.7 m is maximum working height and 9.8 m is maximum platform height.

Can one person move the lift?

Its approximate 340 kg mass and compact wheels support portable positioning on suitable level surfaces, but the site procedure, slope, thresholds and staffing requirements must be assessed.

Can the lift be used without outriggers?

No assumption should be made. The reference design uses adjustable outriggers; deploy, secure and level them exactly as required by the delivered manual before lifting.

What information is needed for a quotation?

Send required working height, operator and tool weight, doorway and elevator dimensions, floor type and capacity, available setup area, power supply, destination port and required documents.

Request a site-matched quotation

Send site photographs or video plus the route and work-point measurements. MYZG can recommend the suitable mast configuration, voltage option, packing method, spare-parts kit and dealer or fleet support plan and can provide a project-based quotation instead of a misleading fixed price.

Shandong Zhuogong Machinery equipment Co.,Ltd — ZGFORKLIFT / MYZG

WhatsApp / Skype / WeChat: +86 13176910558 | Email: MYZG@my-forklift.com