ZGFORKLIFT / MYZG ZG-DZ-06CD Single-Column Sleeve Lift Platform

The ZGFORKLIFT / MYZG ZG-DZ-06CD is a portable single-column sleeve-type lift platform for hotels, shopping centers, schools, museums, offices, warehouses and factory service areas. Its verified reference configuration combines a 150 kg rated load, approximately 280 kg self-weight, 1.1 kW electric-hydraulic power, 220 V reference supply, a 60 × 60 cm platform and compact 1250 × 830 × 1800 mm stored dimensions. Shandong Zhuogong Machinery equipment Co.,Ltd supplies this manually positioned vertical-access solution for one-person maintenance where doorway access, elevator transport, floor care and fast setup matter. aerial platform range.

Customer need and the portable column solution

Many facilities still use ladders for lighting, signage, ceiling inspection and ventilation service. Repeated ladder repositioning slows the job, limits tool storage and exposes workers to avoidable climbing. Large scissor or boom platforms may be too heavy or wide for passenger lifts, finished floors and narrow corridors. The ZG-DZ-06CD answers this need with a lightweight aluminum mast, compact 0.60 × 0.60 m work platform and manually positioned base. Adjustable outriggers create the operating footprint and must be correctly installed and levelled before elevation.

Verified ZG-DZ-06CD reference specifications

complete MYZG product catalog.

Application scenarios

Hotels, malls and commercial property

Replace lamps, inspect ceiling equipment, clean high interior surfaces and service signs while minimizing disruption. Non-marking floor protection, doorway measurements, public exclusion zones and an approved power outlet should be included in the work plan.

Schools, halls, museums and places of worship

Reach gymnasium lights, auditorium fixtures, exhibition lighting and interior architectural details. The buyer should confirm finished-floor capacity, door and elevator limits, setup space for all outriggers and the ability to isolate visitors from the work zone.

Factories and workshops

Support planned inspection of overhead cables, sensors, pipes and low-complexity equipment where vertical access is sufficient. This portable mast lift is not a replacement for a self-propelled platform when the operator must frequently reposition while elevated.

Warehouse and facility service teams

Carry out spot maintenance on lighting, cameras and signs in areas that can be cleared and levelled. Keep the platform directly below the task, respect the rated load, and use a different platform when meaningful horizontal outreach is required.

Selection guide: height, access and floor limits

Start with the actual work point and confirm the required working height and platform height in the final quotation; do not select only from an informal height label. Add the operator, tools and approved material and keep the total within 150 kg. Measure the complete transport route, 1250 × 830 × 1800 mm stored envelope, doorways, passenger or freight elevator, floor loading, ceiling clearance and full stabilizer footprint. Confirm the 220 V reference supply, local plug and frequency, or request another approved power configuration before production.

Compare column, scissor and boom platforms

A single-column sleeve lift is suited to light, portable, straight-up indoor access. A double-mast aluminum lift may offer a wider platform or different load class. A self-propelled vertical mast lift is better when the operator must drive between close tasks from the platform, while a scissor lift provides a larger deck and a boom lift adds horizontal outreach. Buyers should select the machine architecture around the task rather than purchasing height alone.

Buyer's guide and quotation checklist

undefined application and buying articles.

Safe setup and daily inspection

Complete the pre-use inspection in the delivered manual. Check the nested aluminum column or sleeve sections, rollers and guides, hydraulic cylinder and hoses, platform gate and guardrails, controls, emergency lowering, wheels, base frame, all stabilizers, levelling devices, power cable and plugs. Set the machine on a firm level surface, fully deploy and secure the supports, isolate the area and check overhead hazards. Never move the base with a person elevated, climb the guardrail, add improvised height, exceed 150 kg or use the platform as a crane.

Sleeve column and hydraulic maintenance

Keep the lift dry and clean and prevent abrasive dust from collecting between the telescoping sleeve or mast sections. Inspect rollers, guide blocks, fasteners and section surfaces for wear, deformation, corrosion and correct clearance according to the delivered manual. Examine cylinder seals, hoses, fittings, wheels, controls and stabilizer pads; test emergency lowering and protect the power cable. Record every inspection and repair by serial number and use only parts compatible with the delivered ZG-DZ-06CD configuration.

Distributor and rental-fleet opportunity

For distributors and rental fleets, the strongest prospects are facility contractors, hotels, retailers, schools, exhibition companies and industrial maintenance teams. Qualify each lead with task height, access route, floor type, elevator capacity, setup area, power supply and daily move frequency. Demonstrations should show transport, outrigger setup, levelling, pre-use inspection and emergency lowering. Dealer value comes from operator handover, clean well-documented rental units, rapid parts identification and planned inspection programs.

Compliance, export service and buyer confidence

Shandong Zhuogong Machinery equipment Co.,Ltd supports configuration confirmation, production communication, export packing, shipping documents, spare-parts supply and after-sales coordination under the ZGFORKLIFT / MYZG brands. CE documentation and applicable aerial-work-platform requirements depend on the exact configuration and destination and must be confirmed in writing before order. EPA engine certification is generally not applicable to this electric-hydraulic machine; buyers should verify every requested certificate against the final serialised equipment. contact the MYZG export team.

Frequently asked questions

How should I choose the correct lift height?

Send the measured work point and obstacle information. The final quotation must state both working height and platform height for the selected ZG-DZ-06CD configuration.

Can one person move the lift?

Its approximate 280 kg self-weight and caster base support manual positioning on suitable level surfaces, but slope, thresholds, floor loading and staffing must be assessed.

Can the lift be used without stabilizers?

No assumption should be made. Deploy, secure and level every supplied stabilizer exactly as required by the delivered manual before lifting.

What information is needed for a quotation?

Send required working height, operator and tool weight, doorway and elevator dimensions, floor type and capacity, setup area, power supply, destination port and required documents.

Request a site-matched quotation

Send site photographs or video plus the route and work-point measurements. MYZG can recommend the suitable mast configuration, voltage option, packing method, spare-parts kit and dealer or fleet support plan and can provide a project-based quotation instead of a misleading fixed price.

Shandong Zhuogong Machinery equipment Co.,Ltd — ZGFORKLIFT / MYZG

WhatsApp / Skype / WeChat: +86 13176910558 | Email: MYZG@my-forklift.com