• Home
  • News
  • Common Faults And Troubleshooting Method

Common Faults And Troubleshooting Methods For Electric Forklift



一. Battery problem

1. Fault: The electric forklift has short battery life and consumes power quickly.
Troubleshooting method: First check whether the battery connection is firm and whether the terminals are oxidized. If any abnormality is found, clean or replace the battery terminal in time. Secondly, confirm whether there is excessive discharge, and if so, perform appropriate charging processing. Also, pay attention to check whether the battery needs to be replaced.
2. Fault: The electric forklift cannot be charged.
Troubleshooting method: Check whether the battery charger is working properly and confirm whether the charging plug is in good contact. At the same time, check whether the charging line is damaged or has poor contact to ensure that the charging line is smooth.
二. Motor problems
1. Fault: The electric forklift has insufficient starting power.
Troubleshooting method: Check whether there is any odor or heat in the motor. If so, the motor may be overloaded or aged, and the motor needs to be repaired or replaced. In addition, check whether there are any problems with the transmission system, such as whether the transmission belt is loose or slipping and needs to be adjusted or replaced.
2. Fault: The electric forklift travels slowly.

Troubleshooting method: Check whether the transmission of the electric forklift is working properly and whether it needs to be repaired or replaced. At the same time, check whether the tires are inflated properly and the tread wear, and adjust or replace them according to the actual situation.

三. Operating system problems
1. Fault: The electric forklift cannot be started in the cab or the operating system displays abnormally.
Troubleshooting method: First check whether the power supply of the electric forklift is normal and confirm that the battery power is sufficient. Secondly, check whether the control panel of the electric forklift is faulty or damaged, and repair or replace it in time.
2. Fault: The electric forklift has difficulty in steering operation.
Troubleshooting method: Check whether there are any abnormalities in the steering system, such as whether the hydraulic oil is sufficient and whether the steering oil pump is working normally. It is necessary to replenish the hydraulic oil or repair the steering system in time.





Post time:Sep-25-2020

  • PREVIOUS:MYZG was approved by Shandong Engineering Research Center for intelligent small loaders
  • NEXT:What Safety Measures Should Be Done When Operating A Forklift In Rainy Days?

  • RELATED NEWS

    Facebook

    Twitter

    Linkedin

    Pinterest

    Youtube

    whatsapp

    Email

    Phone

    QQ

    Leave a message